Rolec - Pedestal

The BASICCHARGE:EV Pedestal - Concrete base included

£1,600 excl VAT

£1,920 inc VAT

These versatile pedestals are available in a low cost free-to-charge format, or with OCPP back office compatibility via the EV OpenCharge range, allowing for a pay-to-charge solution using the EV driver’s smartphone and/or via authorise-to-charge RFID card/fob.

Install time: Up to 8 hours

Book your installation

What to know

  • Mode 3 (IEC 61851-1) fast charging
  • Available in 1way & 2way versions
  • 3.6kW (16A) & 7.2kW (32A) charging speeds
  • Type 2 (IEC 62196) charging socket(s) c/w security hatchlock(s)
  • Photocell controlled LED amenity lighting head
  • Surface or root mountable
  • Built-in AC overload and fault current protection
  • Built-in DC sensitive protection
  • Built-in LED charging status indicator socket halo(s)
  • IP rated
  • Corrosion resistant

DIMENSIONS: 205mm (W) x 1130mm (H) x 205mm (D)

Key information

Materials used for your EV supply

  • EV charger
  • MCB
  • RCD
  • Armoured Cabling

EV Charger – All EV charges will charge on demand taking an average of 4-5 hours to fully charge your vehicle. They are also packed with safety features to cut the electrical supply in the case of a fault to protect your vehicle.

MCB – Your MCB will cut the power to your EV charger if the circuit becomes overloaded or a dead short arises. Your MCB will be rated to handle the maximum current of the EV charger.

RCB – We install a 30ma RCD to all our EV supplies. The RCD is an extra line of protection for both you, and for the EV charger.

SWA Cabling – Steel Wired Armour (SWA) is the cable we use for all our EV supplies. The current required will determine the thickness of your cable.

Once your installation is complete we will supply you with an electrical certificate. Warranties could be invalid if you fail to present a certificate on request so keep it safe.

Terms and Conditions
Standard price includes a cable length of up to 30 meters from the consumer unit to the EV charger. If more cable is required we can supply at a cost of £4.00 per metre. All circuits must be RCD protected.

Compatible with all plug-in Electric Vehicles Manufacturers